Symantec NetBackup, Manual

Page: 90 / 168

To configure an OpenStorage disk pool
1
In the NetBackup Administration Console, in the left pane, select Media
and Device Management.
2 From the list of wizards in the right pane, click Configure Disk Pool and
follow the wizard instructions.
OpenStorage disk pool properties
The OpenStorage disk pool properties are as follows:
Table 11-3
OpenStorage disk pool properties
Description Property
The disk pool name. Name
The storage server name.
For disk appliance storage, the storage server is the disk appliance host. For Nirvanix
cloud storage, the storage server is
nirvanix.com
.
Storage server
For disk appliance storage, the disk volumes that comprise the disk pool. Disk volumes
The total amount of space available in the disk pool. Total size
The total raw, unformatted size of the storage in the disk pool.
The storage host may or may not expose the raw size of the storage.
Total raw size
A comment that is associated with the disk pool. Comment
The
High water mark
setting is a threshold that triggers the following actions:
■
When an individual volume in the disk pool reaches the High water mark,
NetBackup considers the volume full. NetBackupchooses a different volume in
the disk pool to write backup images to.
■
When all volumes in the disk pool reach the High water mark, the disk pool is
considered full. NetBackup fails any backup jobs that are assigned to a storage
unit in which the disk pool is full. NetBackup also does not assign new jobs to a
storage unit in which the disk pool is full.
■
NetBackup begins image cleanup when a volume reaches the High water mark;
image cleanup expires the images that are no longer valid. For a disk pool that is
full, NetBackup again assigns jobs to the storage unit when image cleanup reduces
any disk volume's capacity to less than the High water mark.
The default is 98%.
High water mark
Configuring OpenStorage
Configuring an OpenStorage disk pool
90