Symantec NetBackup, Manual

Page: 118 / 168

To display the disk volumes in all OpenStorage disk pools on that vendor's
storage, omit the
-dp
option.
2 Display the volume state by using the following command:
nbdevquery -listdv -dv disk_volume -stype server_type
The state is either UP or DOWN.
Merging OpenStorage disk pools
Use the NetBackup
nbdevconfig
command to merge existing disk pools.
NetBackup updates the catalog records to show the correct location of the backup
images in those disk pools.
The following are the prerequisites:
■
The volumes in the two disk pools must have unique names.
OpenStorage requires that vendors use unique names for disk volumes in a
disk appliance.
■
All volumes must be from the same storage server.
■
If the secondary disk pool is referenced by storage units, you must delete those
storage units.
To merge OpenStorage disk pools
1
Change the state of each disk pool to DOWN.
See “Changing OpenStorage disk pool state” on page 115.
If backup jobs are assigned to a disk pool, the state change fails. Cancel the
backup jobs or wait until the jobs complete.
2 Merge the disk pools. The following is the command syntax. The primary disk
pool is the one you want to retain;
nbdevconfig
deletes the secondary disk
pool after the merge.
nbdevconfig –mergedps –stype server_type -primarydp disk_pool_name
-secondarydp disk_pool_name
The following is the path to the
nbdevconfig
command:
■
UNIX: /usr/openv/netbackup/bin/admincmd
■
Windows: install_path\NetBackup\bin\admincmd
3 Change the state of the primary disk pool to UP.
See “Changing OpenStorage disk pool state” on page 115.
Managing OpenStorage
Managing OpenStorage disk pools
118