Symantec NetBackup, Manual

Page: 44 / 168

If a disk pool is the storage destination of a storage unit, you must first delete the
storage unit.
Warning:
Do not delete a disk pool that contains unexpired NetBackup images; if
you do, data loss may occur.
To delete an AdvancedDisk disk pool
1 In the NetBackup Administration Console, in the left pane, select Media
and Device Management > Devices > Disk Pools.
2
Select a disk pool
3 Click Edit > Delete.
4
In the Delete Disk Pool dialog box, verify that the disk pool is the one you
want to delete and then click OK.
Determining AdvancedDisk disk pool state
Disk pool state is UP or DOWN.
To determine AdvancedDisk disk pool state
1
In the NetBackup Administration Console, in the left pane, select Media
and Device Management > Device Monitor.
2 Select the Disk Pools tab.
3
The state is displayed in the Status column.
Determining AdvancedDisk disk volume state
Use the NetBackup
nbdevquery
command to determine the state of the volumes
in AdvancedDisk disk pools.
To determine AdvancedDisk disk volume state
1 Determine the name of the disk volume. The following command lists the
volumes in the specified disk pool:
nbdevquery -listdv -stype AdvancedDisk -dp disk_pool_name
The following is the path to the
nbdevquery
command:
■
UNIX: /usr/openv/netbackup/bin/admincmd
■
Windows: install_path\NetBackup\bin\admincmd
Managing AdvancedDisk
Managing AdvancedDisk disk pools
44