Figure 4-6
RAID group status
Table 4-3
Description of parameters related to the RAID group status
Parameter
Description
Name
The name of the RAID group.
Status
A RAID group may be in the one of the following states:
l
Optimal
indicates that the RAID group is normal.
l
Degraded
indicates that the RAID group is degraded.
l
Partial Degraded
indicates that the operating condition in a
RAID 6 is not optimal. One of the configured disks has failed
or is offline.
l
Failed
indicates that the RAID group has failed.
l
Offline
indicates that the RAID group is not available to the
RAID controller.
Capacity
The capacity of the RAID group. Unit:
GB
and
TB
.
Type
The level of the RAID group.
l
The level of a RAID group that consists of data disks is
RAID
6
.
l
The level of a RAID group that consists of system disks is
RAID 1
.
Disks
The disks included in the RAID group. The numbers displayed
on the interface are the slot numbers of the corresponding disks.
NOTE
For details on the slot number of a disk, see "Panel" in the
NetBackup
5200 Product Description
.
----End
4.4 Checking the Fan Status
This section describes how to check the fan status using the system monitor interface. By
checking the fan status, you can know whether the fan works normally.
Reference Standard
The normal state of a fan is
Device Present
.
NetBackup 5200
Routine Maintenance
4 Guide to the Routine Maintenance Using the System
Monitor Interface
Issue 01 (2010-08-30)
Symantec Corporation
4-7
