Symantec NetBackup 5200 Series, Routine Maintenance

Page: 26 / 52

Table 3-3 Description of the indicators of the front view of NetBackup 5200
Location Type Color Status Description
Chassis System power
indicator Green On The device is powered on.
- Off The device is not powered
on.
System alarm/
location
indicator Red On An alarm occurs to the
device.
Blinking A fault occurred on the
power module.
Orange On
The device is not ready
a
.
- Off The device is running
normally.
SATA disk
module Disk online
status
indicator Green On The disk is powered on.
Red On A disk alarm occurred or
the disk is not ready
a
.
- Off The disk is not powered on.
Disk read/
write status
indicator Green Blinking The device is transferring
data.
- Off The device is not
transferring data.
a: A location command is sent through the management system.
l Check indicator status in the rear view of the NetBackup 5200
Figure 3-2 shows the rear view of the NetBackup 5200.
Table 3-4 lists the indicator status of the rear view of NetBackup 5200.
Figure 3-2 Rear view
TX
4 2 1
4 2 1
RX
TX
RX
P1
P2
NIC2 NIC1
1
2 7 5 4 6 3 8 9
PCIe
1
X8
PCIe
2
X8
PCIe
3
X4
PCIe
0
X8
1 Power running/alarm indicator 2 Link indicator for the service network interface
3 Active indicator for the service
network interface
4 Service network interface
3 Guide to Routine Maintenance on Equipment Site
NetBackup 5200
Routine Maintenance
3-6 Symantec Corporation Issue 01 (2010-08-30)