Symantec NetBackup 5200 Series, Routine Maintenance

Page: 34 / 52

Figure 4-4 CPU status
Table 4-1 Description of parameters related to the CPU status
Parameter Description
ID Indicates the ID of a CPU.
Status
The state of the CPU.
 
l
Presence detected indicates that the CPU is working normally.
l
Failure detected indicates that the CPU is absent.
Voltage The voltage of the CPU.
----End
Exception Handling
If the CPU is in the Failure detected state, contact the technical support.
4.2 Checking the Disk Status
This section describes how to check the disk status on the system monitoring interface.
Reference Standard
l
The normal state of a system disk is Online.
l
The normal state of a data disk is Online or Unconfigured(good).
l
The normal state of a hot spare disk is Hotspare.
Procedure
Step 1
Log into the system monitor interface. For the detailed procedure, see from Step 1 to Step 5 in
4.1 Checking the CPU Status .
Step 2 In the system monitor interface, view the Disk status, as shown in Figure 4-5 . Table 4-2 lists
the parameters and related description.
4 Guide to the Routine Maintenance Using the System
Monitor Interface NetBackup 5200
Routine Maintenance
4-4 Symantec Corporation Issue 01 (2010-08-30)