22
Running the Setup Wizard
Running the Setup Wizard
Configuring a DSL connection
Before performing these procedures, you must complete the tasks in
“Starting the Setup Wizard”
on
page 20.
To configure a DSL connection
1
Run the Setup Wizard.
See
“Starting the Setup Wizard”
on page 20.
2
In the Connection Types panel, click
DSL
.
3
In the Broadband ADSL/SDSL Connection Authentication panel, select the user authentication service.
4
If you selected PPPoE, in the Broadband ADSL/SDSL Connection with PPPoE panel, do the following:
5
If you selected PPTP, in the Broadband ADSL Connection with PPTP panel, do the following:
6
Click
Next>>
.
7
Skip to
“Completing the Setup Wizard”
on page 23.
Configuring a static IP address connection
Before performing these procedures, you must complete the tasks in
“Starting the Setup Wizard”
on
page 20.
To configure a static IP address connection
1
Run the Setup Wizard.
See
“Starting the Setup Wizard”
on page 20.
2
In the Connection Types panel, click
Static IP
.
3
In the Broadband connection using a Static IP panel, do the following:
User Name
Type the account user name.
Password
Type the account password.
Verify Password
Retype the account password.
Connect on Demand To establish the connection on an as-needed basis, check this check box.
Idle Time Out
Type the time, in minutes, after which the connection closes if idle.
Static IP address
Type the static IP address.
User Name
Type the account user name.
Password
Type the account password.
Verify Password
Retype the account password.
Server IP Address
Type the server IP address.
Connect on Demand To establish the connection on an as-needed basis, check this check box.
Idle Time Out
Type the time, in minutes, after which the connection closes if idle.
Static IP address
Type the static IP address.
IP Address
Type the static IP address.
Network Mask
Type the network mask.
