Chapter
3
Running the Setup Wizard
This chapter includes the following topics:
■
About the Setup Wizard
■
Understanding connection types
■
Running the Setup Wizard
■
Accessing the Security Gateway Management Interface (SGMI)
■
Joining SESA
About the Setup Wizard
The Setup Wizard guides you through the steps required to connect your Symantec Gateway Security 400
Series WAN port (WAN 1 on models 460 and 460R) to the Internet, a corporate network, or any other
external private or public network.
Understanding connection types
To connect the appliance to an outside or internal network, you must understand your connection type.
First, determine if you have a dial-up or dedicated account. Typical dial-up accounts are analog (through a
normal phone line connected to an external modem) and ISDN (through a special phone line). Typical
dedicated accounts are broadband cable, DSL, T1/E1, or T3 connected to a terminal adaptor.
Table 3-1
and
Table 3-2
describe the supported connection types, including the following information:
■
The Connection type column correlates to the option button you click on the Main Setup tab or in the
Setup Wizard.
■
The Services column defines the types of accounts or protocols that are associated with the connection
type.
■
The Network termination types column lists the physical devices that a particular connection type
typically uses to connect to the Internet or a network.
