Symantec 14541094 - pcAnywhere Host & Remote, User Manual

Page: 264 / 313

Table 13-2
Device system requirements (continued)
Description Requirement
32 MB RAM
1 MB Disk space
TCP/IP Network protocol
If you have a previous version of Symantec pcAnywhere Mobile installed
You can install the new version of pcAnywhere Mobile over an existing version.
Symantec pcAnywhere Mobile automatically preserves your configuration data
if you install the program in the same directory in which the previous version is
installed.
Before you install over pcAnywhere Mobile, you should ensure that you have no
active pcAnywhere sessions running on your device and that pcAnywhere Mobile
is not running in memory.
See “Ending a mobile session” on page 291.
See “About closing Symantec pcAnywhere Mobile ” on page 293.
Installing Symantec pcAnywhere Mobile
Symantec pcAnywhere Mobile creates a folder on your computer that contains
the program files for pcAnywhere Mobile. It places the pcAnywhere Mobile folder
in your Microsoft ActiveSync directory unless you select a different location
during the installation process. You should install the program in your ActiveSync
directory to ensure that you can install and uninstall pcAnywhere Mobile properly.
If your device is connected to your computer, the program automatically installs
on the device. If your device is not connected to your computer, the program
installs on the device the next time that you synchronize with your computer.
To install Symantec pcAnywhere Mobile when your device is connected to your
computer
1
On the computer, start Microsoft ActiveSync.
2
On the computer, insert the Symantec pcAnywhere CD into the CD-ROM
drive.
Connecting from a mobile device
Symantec pcAnywhere Mobile installation
264