Symantec 14541094 - pcAnywhere Host & Remote, User Manual

Page: 100 / 313

host computer over a modem, you must know the phone number of the host
computer and the logon information.
Depending on your location and phone service, you might need to specify additional
dialing information. This information might include calling card numbers, a
special prefix for connecting to an outside line, or the code to disable call waiting.
If you work in multiple locations, you can set up unique dialing properties for
each location.
This information is configured in the operating system when you set up your
modem. Symantec pcAnywhere lets you use these dialing properties for modem
connections or set them manually.
Cable modem, DSL, and ADSL connections must be configured as TCP/IP network
connections.
See “Configuring a remote network connection” on page 96.
Configuring a modem connection using dialing properties
By default, pcAnywhere uses the dialing properties for your modem that are
configured in the operating system. Symantec pcAnywhere lets you view or edit
these dialing properties when you configure the connection item.
To configure a modem connection using dialing properties
1
In Advanced View, on the left navigation bar, under pcAnywhere Manager,
click Remotes.
2
In the right pane, under Remotes, do one of the following:
■
To edit an existing connection item, right-click the item, and then click
Properties.
■
To create a new connection item, on the File menu, click New Item >
Advanced.
3
In the Remote Properties window, on the Connection Info tab, select the name
of your modem.
4 Select one of the following start modes:
■
Remote Control
■
Remote Management
■
File Transfer
Symantec pcAnywhere lets you switch modes during a session.
See “About the start modes for remote connections” on page 59.
Controlling another computer remotely
Ways to set up a remote computer
100