Symantec 14541094 - pcAnywhere Host & Remote, User Manual

Page: 178 / 313

To keep the connection open
1 In the Symantec pcAnywhere window, on the left navigation bar, under
pcAnywhere Manager, click Command Queues.
2
Do one of the following:
■
To configure an existing command queue file, right-click the file, and then
click Properties.
■
To configure a new command queue file, on the File menu, click New Item
> Advanced.
3
On the Settings tab, under After queue ends, select Remain connected.
4
Click OK.
Disconnecting after the queue runs
Symantec pcAnywhere lets you automatically end the connection after the queue
file runs. You should use this option if you are running the queue file unattended.
To disconnect after the queue runs
1
In the Symantec pcAnywhere window, on the left navigation bar, under
pcAnywhere Manager, click Command Queues.
2
Do one of the following:
■
To configure an existing command queue file, right-click the file, and then
click Properties.
■
To configure a new command queue file, on the File menu, click New Item
> Advanced.
3
On the Settings tab, in the After queue ends list, select Disconnect.
4 Click OK.
Generating a command queue report automatically
You can have pcAnywhere automatically generate a report that provides the
results of the tasks in the command queue file. Symantec pcAnywhere generates
the report when the session ends. The report contains the commands that were
executed during the session and their status. You can save the report in HTML
(.html) or comma separated values (.csv) format.
To generate a command queue report automatically
1
In the Symantec pcAnywhere window, on the left navigation bar, under
pcAnywhere Manager, click Command Queues.
2
Do one of the following:
Automating file transfer and management tasks
Using command queue files to automate tasks
178