10. Inspection and maintenance before riding
23
COOLING SYSTEM INSPECTION
(Checking coolant lever)
Position the motorcycle on level ground and in an upright position.
The reserve tank can be seen on the left side of the engine.
The coolant level must be between the
“F” and “L” marks.
Top up the coolant when the level is at the
“L” mark.
Remove the reserve tank cap to top up the coolant to the
“F” mark.
This motorcycle is filled with high quality coolant that is designed
for the cooling system in the factory. It contains a 50% solution of
ethylene glycol based antifreeze.
Coolant Change
Contact an authorized SYM dealer to have the coolant
changed.
It is highly recommended to use “SYM Long Life
Coolant” or equivalent products when filling or
changing coolant. “SYM Long Life Coolant” is
premixed and contains a 50% solution of ethylene
glycol based antifreeze, and does not need to be
diluted before topping up or changing. “SYM Long
Life Co
olant” is also contains corrosion inhibitor to
protect the cooling system.
Coolant recommended:
“SYM Long Life Coolant”
Concentration: 50%
Radiator coolant capacity: 1,400 cc.
CAUTION:
Use soft water when mixing coolant.
Please pay special attention that using poor quality coolant may shorten the service life of the
radiator.
Coolant should be changed once a year normally.
CAUTION:
Please refer to a table showing what percentage of anti-freeze should be used under different
temperatures if the vehicle is to be operated in the low temperature areas. (especially below 0
℃
)
(F)
(L)
F
L
