In
PIP
mode, it displays the waveform/vector or Audio Meter only for the signal source of the main
picture. If the waveform/vector window is displayed, the Audio Meter will be display only at the top
position (Top left or Top right) at the screen.
For example
, the WFM displays at the bottom left, and the Audio Meter could be only displayed at
the top position in case of collision, as shown in Figure 5.1-27:
Figure 5.1-27 The Illustrate for WFM and Audio Meter Display
PBP
(Picture by Picture)
The two pictures generated by two input signals separately are displayed side by side, and this
function helps with white balance adjustment, and determining shooting angles between two
cameras etc.
In
PBP
mode, the size of the main picture is as large as the slave picture’s. The picture displayed
at the left side is called as Main picture, and the left is called as Slave picture, as shown Figure
5.1-28:
Figure 5.1-28 PBP Mode
In
PBP
mode, it displays the waveform/vector window for the whole screen, including the main
signal and the slave signal, but for Audio Meter, it is only for the signal of the main picture, as
shown in Figure 5.1-29.
In case of position collision, the waveform/vector window could only be displayed at the left
bottom or right bottom of the screen, as shown in Figure 4.1-29, and meantime, the Audio Meter
could be display only at the top position (Top left or Top right) at the screen in case of collision.
