Please refer to the international standard SMPTE2016-1-2007 for the details about AFD
display.
WAVE FORM & VECTOR
Figure 5.1-17 WAVEFORM and VECTOR
Set
DISPLAY
WFM FORM TYPE
item to be MODE1(WAVE FORM& VECT75), MODE2(WAVE
FORM&VECT100), VECT100, VECT75, or WAVE FORM, the waveform window or the vector
window will be displayed at the desired position on the image.
Figure 5.1-18 WAVE FORM TYPE
The
WFM POSITION
item is used to set the position of the wave form/vector display, and you can
select from left bottom or right bottom.
The
WFM TRANS
item is used to set the transparent of the wave form window and the vector
window.
Use the WFM OVERLIMIT item and the WFM UNDERLIMIT item to set the threshold for the wave
form, and the waveform overstepping WFM OVERLIMIT or WFM UNDERLIMIT will be painted
