Figure 5.1-6 Illustration for FOCUS ASSIST Function
ZEBRA
The
ZEBRA
function is used to display images on the screen with a zebra pattern to adjust the
camera exposure parameter. It will compare the signal luminance with the
ZEBRA LEVEL
, and fill
the relevant image area whose luminance is higher than the
ZEBRA LEVEL
with a zebra pattern.
For example
, set the
ZEBRA LEVEL
as 80, the compared results are as shown in
Figure 5.1-7
,
the special area is filled with a zebra pattern.
Figure 5.1-7 Illustration for LUMA ZOOM CHECK Function
LINE2
Select input source format for LINE2 among
LINE2(CVBS)
,
LINE2(Y/C)
and
LINE2(YPBPR
).
For LINE2(CVBS) interface, LINE2(Y/C) interface and LINE2(YPbPr) interface share the same
group of physical interfaces, select the signal source format for LINE2 according to the cable
connection mode.
To select a signal source format for LINE2, you can set the menu item
INPUT SELECT
LINE2
to
be
LINE2(CVBS)
,
LINE2(Y/C)
or
LINE2(YPBPR
), in addition, press
INPUT
button to pop up the
SOURCE MENU
for LINE2 selection.
SDI1
LINE1(CVBS)
LINE2(CVBS)
LINE2(Y/C)
SOURCE
SDI2
LINE2(YPBPR)
HDMI
Figure 5.1-8 LINE2 SWITCHING in SOURCE MENU
NTSC PHASE
item is available only when NTSC format signal is input, while, only the LINE1
