LINE2(Y/C)
: monitor the
Composite Analog Input
as the active signal
through the
Y IN
connector and
C
IN
connector.
LINE2(YPBPR)
: monitor the
Composite Analog Input
as the active signal
through the
Y
IN
connector,
Pb
IN
connector and
Pr
IN
connector.
HDMI
: monitor the
HDMI
or
DVI
input as the active signal through the
HDMI
IN
connector.
When switching an input source, it will display the SOURCE menu at the right top corner of the
screen, and the current active source is labeled in highlight yellow, as shown in Figure 4.1-2.
SDI1
LINE1(CVBS)
LINE2(CVBS)
LINE2(Y/C)
SOURCE
SDI2
LINE2(YPBPR)
HDMI
Figure 4.1-1 Source Menu
Particularly, in PIP/PBP display mode, the signal source for the main picture is set by INPUT
button, while the slave picture’s is set through the CONFIG
SUB IN SELECT item in main
menu, refer to “4.1.7 CONFIG Menu” for the details.
Function Buttons
F1~F5 button are all function buttons. Pressing any F button will display the assigned Functions.
Pressing the desired function will select the function. When selected, the Function will then toggle
through the desired setting including OFF.
The function of each button can be set via the
FUNCTION KEY
setting in the main menu.
OPERATION:
for example
, press
F1
to display the
FUNCTION
menu at the left bottom
corner of the screen, as shown in Figure 4.1-3. Toggle
F1
button to change the value related
to this function without the setting value display.
F1
ON
FLASE COLOR
F2
OFF
NATIVE
FUNCTION
F3
OFF
MONO
F4
OFF
FREEZE
F5
OFF
PBP
