EN ROUTE
28
FIX AND GO /
CRUISE CONTROL / PARKING SENSORS
Fig E
• after having driven for about 10 minutes,
stop and recheck the tyre pressure;
remember to apply the handbrake;
• If a pressure value of at least 3 bar is
detected, inflate to the correct pressure,
resume driving and drive with care to nearest
Fiat Dealership.
Bottle Replacement Procedure
To replace the bottle, proceeds follows:
Fig. F
• press button A (Fig. F) to release the part;
• fit the new bottle and press until it is
automatically engaged.
CAUTION:
Punctures caused by foreign
bodies can be repaired if the damage does
not exceed 4 mm on the tread and on the
shoulder of the tyre.
CAUTION:
Replace the bottle containing
the sealant after the expiry date. Dispose of
the bottle and the sealant properly.
Have the sealing fluid and the bottle
disposed of in compliance with national and
local regulations.
Cruise Control
The driver of the vehicle should always
remain seated and in control of the vehicle
when the cruise control has been engaged.
Never leave the driving seat for any reason
when the vehicle is underway.
Parking sensors
Parking sensors are fitted to some vehicles.
Please use the information provided. Use the
sensors as a guide only. It is the responsibility
of the driver to ensure it is safe to reverse the
vehicle.
Summary of Contents for Select 122
