Swift Group Select 122, Owner'S Handbook Manual

Page: 107 / 149

EQUIPMENT DET
AILS
106
Care instructions:
Clean the blind only with
a damp sponge. Clean on a regular basis to
avoid dirt particle build up as this can damage
the blind material. Use only water or with mild
suds or a vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
To adjust the tension of the Horrex blind:
Trim panels or window surround will need
to be removed before the blind can be
re-tensioned.
In each corner piece there is an cord tensioner
(see photo). By unscrewing the hexagon
screw, the cord can move through the cord
tensioner. When you pull the cord, the tension
will get higher, when you let it move back the
tension will get less.
Roof lights
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when
driving. Roof lights provide essential fixed
levels of ventilation.
Mini Heki Rooflight
To open depress button and push bar
upwards. The rooflight has two open
ventilation positions and a fully open position.
The blind and flynet operate independently of
each other and are engaged by connecting to
each other and sliding.
Heki care instructions: Clean the blind only
with a damp sponge. Clean on a regular basis
to avoid dust/ dirt particle build up as this can
damage the blind material. Use only water or
with mild suds or a vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Midi Heki Rooflight
With operating bar: To open, depress button
and push bar to required position. The rooflight
has two open ventilation positions and a fully
open position.
To close, reverse the operation and then check
if locked into position.
With crank: To open, rotate the crank until a
resistance is noticeable during the operation.
To close, reverse the operation and then check
if locked into position.
ROOFLIGHTS