TECHNICAL INFORMA
TION
140
ROAD LIGHTING,
PANEL VAN REAR LIGHT
CLUSTER ACCESS
REAR ROAD LIGHT CLUSTERS
Bulb access is from the rear of the cluster.
Please see the Fiat handbook for specific
details of the clusters and individual lights
contained within them.
The rear road light clusters are secured to
the rear of the motorhome via nuts located
on the rear of the cluster. To access these
fixing nuts, an internal panel must be
removed.
Two angled panels can be found at the
rear of the motorhome, close to the rear
door hinges. In the upper sections of these
panels, a removable section exists (the
removable panel may also house remote
thermostats, light switches etc).
To remove the panel, first locate single screw
cover caps at the top of the panel, using a
flat bladed screwdriver or similar. Removing
the screws will then allow the panel to
be pulled up away from the corner of the
vehicle, exposing a void with access to the
rear of the lamp clusters.
Reverse the procedure and push fit the
screw cover cap back into place once
complete.
ROAD LIGHTING, FRONT OF VEHICLE
Please see the information contained within
the Fiat handbook for details of access to
headlight or side repeater bulbs.
BULB REPLACEMENT
Summary of Contents for Select 122
