background image

GB.COMPACTAHSK.210520

Registered design. The company reserves the right to make design changes without prior notice.

54     www.swegon.com

20.4 Electrical Data

20.4.1 Air Handling Unit

MIN. POWER SUPPLY
COMPACT 

Air: 

     

1-phase, 3-wire, 230 V -10/+15%, 50 Hz, 10 AT  

COMPACT 

Heat: 

     

3-phase, 5-wire, 400 V -10/+15%, 50 Hz, 16 AT

20.4.2 Fans

RATED DATA PER FAN 
COMPACT Air and COMPACT Heat
Size 02:  

1 x 230 V, 50/60 Hz, 0.4 kW (0.24 kW)*

Size 03:  

1 x 230 V, 50/60 Hz, 0.4 kW

*) The motor controls limit the output power to the value speci-
fied.

20.4.3 Electrical equipment cubicle

COMPACT Air:  
One 2-pole 3A Automatic circuit breaker for 230V control 

current

 COMPACT Heat:  
One 2-pole 3A Automatic circuit breaker for 230V control 

current

One 2-pole 10A Automatic circuit breaker for control cur-

rent to fans

20.4.4 Heat Exchanger Motor

COMPACT Air and COMPACT Heat:
Stepping motor, 3-phase, 5.8 A (2A)*, 62 V max 90 V. 

*) The motor controls limit the output power to the value speci-
fied.

20.4.5 Control Inaccuracy

Temperature ± 1

o

C.

Airflow ± 5%.

Summary of Contents for COMPACT Air

































































Reviews: