GB.COMPACTAHSK.210520
Registered design. The company reserves the right to make design changes without prior notice.
14 www.swegon.com
7.2 Air flow/Pressure
Basic functions are set at INSTALLATION LEVEL
and values are read and set at USER LEVEL.
Therefore see also Section 9.3, in which the func-
tions for flow/pressure are described in detail.
7.2.1 Readings
Used for performance checks.
7.2.2 Settings
The functions selected at INSTALLATION LEVEL and the
min. and max. airflows of each unit size (see the table
below) determine which values can be set.
Values for airflow (l/s, m3/s, m3/h), pressure (Pa) or input
signal strength (%) can be preset depending on the func-
tion selected.
LOW SPEED
Must always be preset! The value for low fan speed can-
not be higher than the value for high speed.
Low speed can be set as 0, which means that the air han-
dling unit stops.
HIGH SPEED
Must always be preset! The value for high speed cannot
be lower than the value for low speed.
MAX SPEED
Is only appropriate for the airing function. The value for
max speed cannot be lower than the value for high speed.
AIRFLOW
MIN FLOW
COMPACT AIR AND
COMPACT HEAT
MAX FLOW
COMPACT AIR AND
COMPACT HEAT
SIZE
m
3
/h *
m
3
/s
m
3
/h
m
3
/s
02
300
0.08
900
0.25
03
300
0.08
1440
0.40
* When you adjust the value, round off the value to the nearest
adjustable step.
Min/Max Airflows
AIR FLOW/PRESSURE
*FLOW/PRESSURE*
READINGS
SETTINGS
*FLOW/PRESSURE*
READINGS
SETTINGS
LOW SPEED
HIGH SPEED
MAX. SPEED
