31
2
4
3
Recorder Page
Player
The player can display the name of selected soundtracks and playback progress, includes 8 function
buttonsstop ( ) play/pause ( / ) previous( ) rewind ( ) forward ( ) next ( )
play mode ( ) and record ( ).
Meter display of
playback and record
Display meter of Playback and Record in real time
Playback list
Display playlist in the USB disk, single press a soundtrack to play it.
Record
Record switch is OFF as default, and the sound source to be recorded is from Master L/R, single press
the record button to record audio content of Master L/R bus to the USB disk in .WAV format.
Input Stage subpage
8
2
3
4
5
6
48V phantom power
Press the key, to enable the 48V phantom power. Press again to disable it. The default is set as disabled.
Switch channels
Press the key, to choose previous or next channel within a same layer
REV
Press the key to enable reverse. Press again to disable it. The default is set as disabled.
Delay
Press to enable the delay, and the default is set as disabled. To adjust the time of delay by turning the main
Encoder on the control panel or on the touch screen (fine tuning can be activated when pressed the knob down).
The delay ranges from 0ms to 200ms, while the default is 0ms.
HPF
Press to enable the HPF, and the default is set as disabled. To adjust the frequency of HPF by turning the
main Encoder on the control panel or on the touch screen (fine tuning can be activated when pressed the
knob down).The frequency ranges from 16 Hz to 400 Hz, while the default is 16 Hz.
Insert
Press the key of any effect module, to insert this module before the EQ on the channel. All effects cannot be
used on more than one channel, and all inputs can only be inserted with one effect module (the link parameter
of this module is the serial number of the channel). The busses (Bus1~Bus8, L&R) can be inserted with two
effect modules at the same time, which is sequenced to insert into the bus by the priority of selection. When
the selected module is occupied by other channel or bus, you will see a window popped up and say:
“
The
module can be used only once and it is already used by **. Are you sure you want to use the module forcibly
now
?
Yes No
”
. Access path of effect setting: SETUP FX double press to select the module
