12
2
3
4
5
Bus Send Sub-page
The input channel can send signal into 4-channel mono bus, 4-channel stereo bus and L/R master output bus.
Channel Switch
Single press the key to switch between previous or next channel on the same layer
Bus-send enable
Single press a bus button, to send signal to this bus, press again to disable the send.
PreFader/PostFader Switch
The default is set as PreFader, single press the key to switch to PostFader, press again to set it
back to default.
PAN control
he default is set as 50|50, the PAN value can be tuned by dragging the slider, or turning the main
Encoder on the control pane. Double press the parameter frame to set it back to default.
Send level control
Control the level of signal by drag the slider up and down.
Chart 1
Factor
Ratio to BPM
1
2
3
4
5
6
7
8
9
10
11
12
13
1/24
1/16
1/12
1/8
1/6
Equivalent to BPM
x 2
x 3
x 4
x 5
x 6
1/2
1/4
27
2
3
4
5
6
Feedback:
to return output delay into input, so as to generate echo from amplitude attenuation. Ranges
from 0 to 90, with a default @ 0. To adjust by turning the main Encoder or dragging slider on the touch
screen (fine tuning can be activated by pressing the main Encoder knob).
ReverbSubpage
Double press
“R
everb1 or 2
”
in the FX Subpage, access to Subpage of Reverb parameter tuning, as
showed in the picture below
