25
2
3
4
5
6
EQ HS
Curve:
displays the HS curve
Gain
ranges is
±1
8 dB, with a default @ 0 dB. Adjust the Gain by turning the main Encoder or on the
touch screen (fine tuning can be activated by pressing the main Encoder knob). Double press the parameter
frame to set it as default.
Freq
ranges from 1.5 KHz to 15 KHz, with a default @ 6.3 KHz. Adjust the Frequency by turning the main
Encoder or on the touch screen (fine tuning can be activated by pressing the main Encoder knob). Double
press the parameter frame to set it as default.
Other parameters
Speed
ranges from 50 to 200, with a default @ 100. Adjust the Speed by dragging the slider, or turning
the main Encoder on the control panel (fine tuning can be activated by pressing the main Encoder knob).
Intensity
ranges from 50 to 200, with a default @ 100. Adjust the Intensity by turning the main Encoder
or on the touch screen (fine tuning can be activated by pressing the main Encoder knob).
Pre Delay
configure time of Pre Delay, ranges from 0~100ms, with a default @ 0ms. Adjust the time
parameter by turning the main Encoder or on the touch screen.
EQ LS
Curve chart
: displays the LS curve
Gain
: ranges is
±
18 dB, with a default @ 0 dB. Adjust the Gain by turning the main Encoder or on the
touch screen (fine tuning can be activated by pressing the main Encoder knob). Double press the
parameter frame to set it as default.
Freq
ranges from 20 Hz to 200 Hz, with a default @ 100 Hz. Adjust the Frequency by turning the main
Encoder or on the touch screen (fine tuning can be activated by pressing the main Encoder knob).
Double press the parameter frame to set it as default.
14
1
1
2
3
4
5
6
Input Stage subpage
2
3
4
5
6
Stereo Channel
Stereo input and Mono channel are the same, also include five modules, which are Input Stage, EQ, Dynamics,
Bus Send and Output Stage. Single press a module and a sub-page will pop up. Single press the close button
on the subpage to exit.
