18
2
3
4
5
6
Switch Channel
Single press the button to switch between previous or next channel on the same layer
Bus send enable
Single press a bus button, to send channel signal to the bus, press again to disable.
PreFader/PostFader toggle selection
The default is PreFader. Single press the button, to toggle PostFader, press again to set it back to default.
PAN control
The default is 50|50, the PAN value can be tuned by dragging the slider, or turning the main Encoder on
the control panel. Double press the parameter frame to set it back to default.
Send level control
Control the level of signal by drag the slider up and down.
Insert
Press the button of any effect module to insert this module before the EQ on the channel. All effect module
cannot be shared on more than one channel. The busses (Bus1~Bus8, L&R) can be inserted with two effect
modules at the same time, which is sequenced to insert into the bus by the priority of selection. When the
selected module is occupied by other channel or bus, you will see a window popped up and say:
“T
he
module can be used only once and it is already used by **. Are you sure you want to use the module forcibly
now?
Yes or No?
Maintenance page
21
2
3
5
6
4
7
8
Update from USB
Single press
“U
pdate from USB
”
button, a dialog pops up
“A
fter the update the System will reboot
automatically. Are you sure you want to update the System
?”
, press
“
Install
”
and complete the installation
following the tip information.
Factory Reset
Single press
“F
actory Reset
”
button, a dialog pops up
“
Do you wont to do a Factory Reset
?
This reset your
Settings to factory defaults. The System will restart automatically after finishing , then press
“
Factory Reset
”
and the console will automatically reboot.
If the console appears lagged in operation after a long-time running, you can use this function to reset the
console to factory settings. However please save all your important data by exporting to a USB disk before
you had reset the console which will irrevocably erase all the internal data.
Toggle Dev Mode
Debugging mode, not recommended to non-professional users.
Android Home Screen
Debugging mode, not recommended to non-professional users.
Import Settings
Debugging mode, not recommended to non-professional users.
Export Settings
Debugging mode, not recommended to non-professional users.
Time Settings
Save Log
Debugging mode, not recommended to non-professional users.
System time setting function, single clic
k “ Time Settings” to set system time.
