10
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
Chapter 3: HENM-70 Operation and Menus
This third chapter provides the user all the necessary information to control,
configure and operate the equipment properly.
3.1
Display
To switch the equipment on and off, press the ON/OFF button. When the
equipment is turned on, the display will show the start-up message (model
and version of the equipment) for two seconds.
When a video, audio or data input has been selected, a character connected
to this input is displayed in the main screen.
Next, the main screen of the HENM-70 encoder & modulator is shown.
Figure 3.1 HENM-70 front panel/ Main screen explanation
F: 1350,000MHz DVBS2
P:+0dBm SR12.400 B15
QPSK 3/4 18.000
SGGG 576/50
i
420S
XXX/XX
Frequency
Output Power
Modulation Scheme
Video Input Selection
Audio Input Selection
Symbol Rate
Data Input Selection
FEC
Input Video Signal Format
Transmission Standard
Bandwidth
Bitrate
Latency
Encoder Video Profile
