79
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
6)
Once the firmware file has been downloaded, save it in a USB device.
In the USB device, the only file that can be allocated inside it is the
firmware file of the device to be updated.
7)
With the equipment completely power off (
with no power
supply
), insert the USB device in the USB connector, situated in the
rear panel.
Before introducing the USB device, remove the power supply of the
equipment.
8)
Now, switch on the device.
9)
Go to Unit menu. In case of being in the main screen, press cross
button so as to access to the menu. There, with the Up, Down
buttons, select the Unit option.
10)
Select Firmware by pressing the OK button.
11)
Select Check USB Memory with the OK button.
12)
Now, automatically the device updates the firmware. The screens
which are shown below display the different steps that the device is
making while the updating process.
Don’t power off the device during the updating process.
