115
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
6.2.1
Power supply
In this section technical features about the power supply connections and
the connectors needed are described.
In all the Lemo connectors, the pin number one is circled and the
succeeding pins are in counter clockwise order.
AC Power supply
The encoder and modulator equipment can be powered by an AC source
between 100 and 240V, or a DC source from 8 to 36 V.
The mains frequency should be between 50 and 60 Hz.
The AC mains input uses a Neutrik MLC connector. A cable with the required
connectors is supplied with the equipment. The AC power connector used in
this equipment is designed to prevent accidental disconnection. To extract
the connector, pull back the locking clip and rotate the connector, as
indicated on the connector itself.
Power supply AC connection technical features
Item
Features
Connector label
POWER A.C.
Connector type
MLC Neutrik
Supply voltage
100-240 V. (50/60Hz)
Table 6.1 AC Power supply features
Pinout
