42
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
3
Fec:
So as to select if FEC is enabled or disabled in the received signal
press Right, Left buttons. (eligible parameter)
The available options are:
Enable Col: Row:
(The IP Forward Error Correction is
composed by a number of FEC columns and rows. In this field it
is shown the number of FEC columns and rows of the received
signal) (reading parameter)
Disable
4
Port:
This field must be filled in with the port number of the decoder
device through which is going to receive the signal. So as to edit this
parameter, press the OK button and then, select the desired port
with the Up, Down, or Right, Left buttons. So as to save the
introduced value, press the OK button. (editable parameter)
5
Output Delay [1..9942]ms:
This delay means the time passed between the Transport Stream is
obtained in the decoder and the signal is taken out from the
decoder. So as to edit this parameter, press the OK button and then,
select the desired port with the Up, Down and Right, Left buttons.
So as to save the introduced value press the OK button. (editable
parameter)
6
TP per IP:
This field displays the number of TS packets per IP packet. (reading
parameter)
7
Status:
This field displays the status of the IP input. (reading parameter)
8
Protocol:
This field displays the protocol used for the communication. (reading
parameter)
The possible options are:
UDP
RTP
