104
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
-
Addressing:
In this field it is configured if the IP packets received come from a
unicast address or from a multicast address. (eligible parameter)
-
Multicast address:
In this field the multicast address must be specified so as to receive
the information properly. (editable parameter)
-
FEC:
In this option the FEC option can be enable or disable. In case the
enable option is selected, as the IP Forward Error Correction is
composed by a number of FEC columns and rows, it is shown the
number of FEC columns and rows of the received signal. (eligible
parameter)
-
UDP Port:
This field must be filled in with the port number of the device through
which is going to receive the signal. (editable parameter)
-
Output Delay:
This delay means the time passed between the Transport Stream is
obtained in the decoder and the signal is taken out from the decoder.
(editable parameter)
-
Status:
In this field the status of the IP input is displayed. (reading
parameter)
-
BitRate:
In this field it is shown the bitrate of the received signal. (reading
parameter)
-
Packet Size:
In this field it is displayed the size in bytes of the IP received packet.
(reading parameter)
-
TP per IP:
In this option the number of Transport Stream packets per IP packet
is displayed. (reading parameter)
