88
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
4.
Select GAT option and set the Gateway address. So as to change the
Gateway address first press OK button and then, with the Up, Down
keys select the desired number. So as to change from one character
to another, press Right, Left keys. Press the OK button so as to save
the introduced value.
Figure 5.4 Gateway
5.
Select Admin Pass option and set the administrator’s password. If it is
wanted to access to the Webserver directly without setting any
password, the Admin Pass must be set to 0 (00000000). However, if
it is wanted to set an administrator’s password, it is necessary to
introduce 8 digits. In this way, with this password, the administrator
can access to the Webserver and make any configuration,
modification or monitoring.
Figure 5.5 Admin Pass
6.
Select Restore Admin Pass option to restore de default value of the
administrator’s password.
Figure 5.6 Restore Admin Pass
7.
Select User Pass option and set the user’s password. If it is wanted to
access to the Webserver directly without setting any password, the
User Pass must be set to 0 (00000000). However, if it is wanted to
set a user’s password, it is necessary to introduce 8 digits. In this
way, with this password, the user can access to the Webserver and
make any monitoring.
UNIT ETHERNET
LOC 192.168.001.010
MSK 255.255.000.000
GAT 192.168.001.001
UNIT ETHERNET
70-B3-D5-1A-C0-00
Admin Pass: ********
Restore Admin Pas
UNIT ETHERNET
70-B3-D5-1A-C0-00
Admin Pass: ********
Restore Admin Pas
