61
HENM-70
Encoder & DVB-S2/S Modulator
USER’S MANUAL V5.6
3.5.2.3.1
DVB-S2
Figure 3.37 DVB-S2 Menu
Line nº
Function
1
Freq:
Select the frequency at which the signal is going to be transmitted.
There are two options available:
Manual
So as to establish the frequency value first, press the OK button and
then, with the Up and Down arrows buttons select the desired value.
So as to save the introduced value, press the OK button. (editable
parameter)
70 MHz
2
Sort of output:
So as to select the sort of output, press Right and Left keys. Once
the option is selected, press the OK button so as to save it. (eligible
parameter)
The possibilities are:
Off (Turn off the RF output)
Low Carrier (The output signal is a continuous wave and the
output power is adjusted to 10 dB less than what is configured in
the power field)
Carrier (The RF output is carrier only (CW) without modulation.
So as specify the output power, select it in the power option)
Modulator (The RF output carrier with modulation. So as specify
the output power, select it in the field below)
DVB-S2
F: 1.640, 365MHz >
Low Carrier <>
L-BAND: -5.5 dBm
>
DVB-S2
BUC LO: 13,05 GHz <
Modul: 32APSK <
LDPC Fec: 9/10 <
DVB-S2
SR: 12.4MS/s B:14
Roll Off: 0,20 >
Pilots: On >
DVB-S2
Spectrum: Normal >
10 MHz: Off
<
Antenna Gain: 42dBi
