77
SVANTEK 977W User Manual
If
Login Type
is
None
no
User Login
and
User Password
positions appear.
It should be used when SMTP server requires no authentication.
Sender e-mail
– allows the user to enter up to 48 characters of e-mail
address from which the e-mail message will be sent.
Recipient e-mail
– allows the user to enter up to 48 characters of e-mail
address to which the e-mail message will be sent.
E-mail Subject
– allows the user to enter up to 20 characters of the
message's subject.
E-mail Message
– allows the user to enter up to 20 characters of
additional text which will be appended to standard e-mail message
template used for alarm notification.
SSL Encryption
– when switched on means that the device will attempt to
configure the modem to connecting to the mail server used the encryption
protocol SSL.
Default Port
- when switched on means that the device will try to
communicate with the mail server on the default port (25 for normal calls,
465 with SSL).
Disabling of
Default Port
will initiate the
Port
position, where the user will be
able to set its own port.
Editing each position is performing in the special window with the text editor
function, which is opened after pressing the
◄ or ► push-buttons.
8.10. Checking of the instrument specification - Unit Label
The
Unit Label
position enables the user to
check information about the instrument
type, its serial number, the current software
version
installed
and
the
relevant
standards, which the instrument fulfils.
The displayed text is scrolled on the display
after pressing
▲
and
▼
.
<ENT>
According to the Welmec requirements the
Sound Meter
should have
approved by the notified body firmware with specific serial number and CRC
as well as serial numbers of preamplifier and microphone.
Note: The contents of the Unit Label
window should be always sent to Svantek’s service
department or official representative in case of any problems faced by the user during the
instrument’s normal operation in the field.
