72
SVANTEK 977W User Manual
SMS message in case of alarm
When the alarm is generated during the measurement it is possible to send
an SMS message to the phone number, defined in the
SMS Option
window
(
path: <Menu> / Instrument / Wireless Transfer / SMS Options).
E-mail message in case of alarm
When the alarm is generated during the measurement it is possible to send
an E-mail message to the address, defined in the
E-mail Settings
window
(
path: <Menu> / Instrument / Wireless Transfer / E-mail Settings).
Note: SMS and e-mails can be send in case the instrument is working with the modem (for example,
as a part of SVANTEK monitoring stations)
8.8. Setting
the instrument’s internal Real Time Clock – RTC
The
RTC
position enables the user to
programme the internal
Real Time Clock
.
This clock is displayed in the different
places of the display depending on the
selected view mode.
<ENT>
Note: In this window the user may change time zone and time in
the limited range. This range increases by six seconds each day
from the date of the RTC correction by service. For example, after
7 days, the user can adjust the clock by +/- 42 seconds, and after
a year by +/- 36.5 minutes. Date and time changes without
limitation can be perforemed only by authorised user in the
Welmec menu (path: <Menu> / Welmec / Service / RTC). In other
case the instrument informs the user about acceptable time range.
The required
Time
(hour, minute and second) can be selected in a special
window, which is opened by means of the
◄ or ► push-buttons.
To set hours, minutes or seconds the user should enter the correct field
position by pressing the
◄ or ► push button and then select the correct value
by means of the
▲ or ▼ push-buttons. To set the chosen value the user
should press the
<ENTER>
push-button.
The required
Date
can be selected in a special window, which is opened after
pressing the
◄ or ► push-buttons when the
Date
text is displayed inversely
in the
Timer
sub-list.
To set the correct date, the user should select its position by means of the
◄
or ► and ▲ or ▼ push button and then press
<ENTER>
to set the chosen
value.
