76
SVANTEK 977W User Manual
Editing each position is performed in the special window with the text editor function, which is opened after
pressing the
◄ or ► push-buttons.
8.9.4. Configuration of SMS service - SMS Option
The
SMS Options
position allows the user to configure SMS service used for
alarm notification. For more information about alarm notification see Appendix
J (Alarm notification).
The
SMS Options
window
contains the following positions:
Phone Number
– allows the user to enter up to 20 characters of the phone
number where the text messages will be sent.
Text Message
– allows the user to enter up to 20 characters of additional
text, which will be appended into a standard alarm message template.
Editing each position is performing in the special window with the text editor
function, which is opened after pressing the
◄ or ► push-buttons.
8.9.5. Configuration of e-mail service - E-mail Settings
The
E-mail Settings
position allows the user to configure the e-mail service
used for alarm notification. For more information about alarm notification see
Appendix J (Alarm notification).
The
E-mail Settings
window contains the following positions:
If
SvanMail
position is switched on the user should define only positions:
Recipient e-mail
,
E-mail Subject
and
E-mail Message
. The
SvanMail
option allows SvanNET compatible instruments to send e-mails without
additional parameters, simplifying the process of configuring alarm
notifications.
If
SvanMail
position
is switched off the user should define additional up to five
positions:
SMTP Address
– allows the user to enter up to 32 characters of SMTP
server address which will be used to send e-mail messages.
Login Type
–
None
,
Login
,
Plain
and
Cram
. These options define
authentication method, which is dependent on SMTP server used for
sending e-mails. In most cases,
Plain
value is used.
User Login
– allows the user to enter up to 20 characters of user login text
used to establish verified connection with SMTP server.
User Password
– allows the user to enter up to 20 characters of user
password text used to establish verified connection with SMPT server.
