20
SVANTEK 977W User Manual
“clock”
icon is displayed when the timer is
On
. It is active when the instrument is waiting
for the measurement start up to occur. When
the measurement start up is close, the icon
changes its colour to green and starts to blink.
“battery”
icon is displayed when the
instrument is powered from the internal
batteries. Icon corresponds to the status of
the batteries
(three, two, one or none
vertical bars inside the icon). When
voltage of batteries is too low, the icon
becomes red.
“satellite”
icon is displayed when GPS is
active. Colours of the icon define the state of
the GPS: green
– active, blue – searching,
grey
– disconnected.
“Bluetooth”
icon is displayed when the
Bluetooth
®
is switched on. Colours of the
icon define the state of the Bluetooth
®
:
blue
– connected, grey – disconnected.
“plug”
icon is displayed during external
power is connected to the
7-16V
socket
icon is displayed if the current firmware is
different from the original one (which was
installed when the instrument has been
purchased)
Icons connected with modem functionality:
or
Icon is displayed when the
GPRS
function is
swithed on and there is no cable connection
with the modem
or
Icon is displayed when the
GPRS
function
is swithed on and there is no cable
connection with the modem
or
icon is displayed when the wireless
transmission (
GPRS
modem) is active, but
there is no connection with Host or SvanNET
or
icon is displayed if there is no GPRS
connection
or
icon is displayed if there is connection with
Host
icon is displayed if there is GPRS
connection and shows the level of the
GPRS
signal. In
additional
GPRS
connection yellow and red arrows appear
icon is displayed if there is connection with
SvanNET.
3.5.
Data storage
Memory type
All available measurement results and settings can be stored in the external memory (micro
SD Card
) as files in
the predefined or assigned directories. The setup files are stored in the predefined directory SETUP. The
predefined directories can be changed by the user or renamed.
The
SD Card
external memory is activated automatically after insertion of the card.
The
“
SD Card
” icon is displayed when the external micro SD card memory is inserted in the memory
slot.
If the SD card is removed from the memory slot the
“memory warning”
icon appears instead of
“SD Card” icon.
The
SD Card
memory is organised as standard memory with directories and sub-directories (FAT32 file system).
It is possible to create and delete the directories.
The content of each memory file type can be checked with the help of the
File Manager
or
Setup Manager
function of the
File
menu.
In the
File Manager
or
Setup Manager
windows data files are described by their file
name with an extension (
SVL
,
SVT
or
WAV
)
as well as additional icon and size (
2KB
etc.).
Directory
Logger file .SVL
