Svantek SVAN 948, User Manual

Page: 71 / 198

SVAN 948 USER MANUAL
.
4 - 28
•
A type 1 according to the IEC 651 and IEC 61672-1 standards,
•
C type 1 according to the IEC 651 and IEC 61672-1 standards.
The view of the displays in the CHANNEL 3 sub-list; the selection of the weighting filter
The characteristics of the filters are given in Appendix D. The selection of the required filter is made
with the < > , < > push-buttons. The user can pass to the selection of the next parameter from the
CHANNEL x sub-list pressing the < > , < > push-buttons. After pressing the <ENTER> push-button any
changes made in the sub-list are confirmed and the sub-list is closed. The return to the
CHANNELS SETUP sub-list ignoring any changes made in the sub-list is made after pressing the <ESC>
push-button.
Selection of the weighting filter in VLM - FILTER
The following weighting filters are available in a channel of the instrument for the vibration signals:
•
in the case of the acceleration measurements: HP1 , HP3 , HP10 , W–Bxy , W–Bz , H–A , W–Bc , KB ,
Wk , Wd , Wc and Wj ;
The view of the displays in the PROFILE 2 sub-list; the selection of the weighting filter in the case of
acceleration measurements
•
in the case of the velocity measurements: Vel1 , Vel3 , Vel10 and VelMF ;