Suzuki Swift 2015 Owner'S Manual Download Page 220

Page: 220 / 336

7-29

INSPECTION AND MAINTENANCE

74LH0-74E

54G130

2) Squeeze lock (1) towards wiper arm (2)

and remove the wiper frame from the
arm as shown.

3) Unlock the lock end of the wiper blade

and slide the blade out as shown.

60A260

71LMT0708

(3) Retainer

4) If the new blade is provided without the

two metal retainers, move them from
the old blade to the new one.

71LMT0707

(4) Locked end

5) Install the new blade in the reverse

order of removal, with the locked end
positioned toward the wiper arm.
Make sure the blade is properly

retained by all the hooks. Lock the
blade end into place.

6) Reinstall wiper frame to arm, making

sure that the lock lever is snapped
securely into the arm.

For rear wipers:

80G146

1) Hold the wiper arm away from the win-

dow.

2) Remove the wiper frame from the arm

as shown.

3) Slide the blade out as shown.

65D151

EXAMPLE

(3)

(4)

Summary of Contents for Swift 2015

















































































































































































































































































































































Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands

Suzuki Swift 2015, Owner'S Manual

Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands