Suzuki Swift 2015 Owner'S Manual Download Page 38

Page: 38 / 336

2-19

BEFORE DRIVING

74LH0-74E

TROUBLESHOOTING

SYMPTOMS

PROBABLE CAUSES

REMEDIES

Transmitter function (Unlock/Lock/car
locator function) not working

1. Battery of the transmitter is weak.
2. Transmitter is exposed to water or it is

wet.

3. D/L or Dome fuse for controller is blown

in the vehicle.

4. In case if any door is open or door

sensor is shorted with the body ground,
remote will not activate the central
locking/ alarm system.

1. Check the battery.
2. Dry the transmitter and check it.
3. Check and replace the D/L or Dome

fuse.

4. Check if all doors are properly closed

and door switch functioning is O.K.

Operation distance of the transmitter is
less than 20m but still transmitter (Unlock/
Lock/car locator) is not working

1. Battery of the transmitter is weak.
2. Strong RF interference. (e.g. Radio

Towers, High Voltage Transmission line
near by)

1. Check the battery.
2. Drive the vehicle away from the

particular spot and re-test the control
distance.

It is difficult to activate or deactivate the
system in certain area using the
transmitter.

1. The strong interference caused by

excessive RF activity in a particular
area

1. The interference is temporary and only

while the vehicle is in that area.

Alarm is not triggered even if any door(s)/
engine hood/trunk/tailgate opened in arm
stage.

1. The contact point of the door(s), front

bonnet or rear boot switch is faulty.

2. The connection of the door(s), front

bonnet or rear boot switch is loose.

1. Replace the defective Switch.

2. Make proper connection.

Siren does not sound when alarm is
triggered.

1. The connection of the siren wire is

loose.

2. Siren is faulty.

1. Make proper connection.
2. Change the siren.

Seat Belts and Child Restraint Systems: 3

Summary of Contents for Swift 2015

















































































































































































































































































































































Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands

Suzuki Swift 2015, Owner'S Manual

Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands