Suzuki Swift 2015 Owner'S Manual Download Page 150

Page: 150 / 336

5-23

OTHER CONTROLS AND EQUIPMENT

74LH0-74E

Notes on iPod

Supported iPod

• iPod

touch (5th generation)

• iPod

touch (4th generation)

• iPod

touch (3rd generation)

• iPod

touch (2nd generation)

• iPod

touch (1st generation)

• iPod

classic

• iPod

nano (7th generation)

• iPod

nano (6th generation)

• iPod

nano (5th generation)

• iPod

nano (4th generation)

• iPod

nano (3rd generation)

• iPod

nano (2nd generation)

• iPod

nano (1st generation)

• iPod

(5th generation)

• iPhone

6 Plus

• iPhone

3GS

• iPhone

* Some functions may not be available

depending on the model of iPod

* iPod

is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

* iPhone

is a trademark of Apple Inc.,

registered in the U.S. and other coun-
tries.

* Apple is not responsible for the operation

of this device or its compliance with
safety and regulatory standards.

iPod

connection

• Make sure to detach the iPod

after

pressing the engine switch to change the
ignition mode to LOCK. The iPod

may

not be shut down when it is being con-
nected and may result in battery deple-
tion.

• Please do not connect iPod

accesso-

ries such as an iPod

remote control or

headphones while connecting the iPod

with the unit. The unit may not operate
correctly.

AUX Function

74LHT5011

(1) CD button

AUX connection

To listen to auxiliary audio sources (sold
separately) through the unit, follow the
instruction below.
1) Connect the auxiliary audio source to

the AUX/USB socket (separately
attached) with an AUX cable.

2) Each time the button is pressed, the

mode will change as follows:

EEK/TRACK

RPT

RDM

OUND

TUNE/FLD

VOL

PWR

(1)

audio (if equipped)

AUX (if equipped)

Summary of Contents for Swift 2015

















































































































































































































































































































































Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands

Suzuki Swift 2015, Owner'S Manual

Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands