manualshive.com logo in svg

Suzuki Swift 2015, Owner'S Manual

The Suzuki Swift 2015 Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions, maintenance tips, and troubleshooting solutions to help Swift owners properly care for and operate their vehicles. Get your manual today and unlock the full potential of your Suzuki Swift 2015.

Share
Download
background image

5-51

OTHER CONTROLS AND EQUIPMENT

74LH0-74E

AUX/USB Socket (if equipped)

74LHT0518

Connect your portable digital music player,
etc. to this socket to enjoy music through
the vehicle’s audio system using it as a
source. Refer to “Audio System” in the
“OTHER CONTROL AND EQUIPMENT”
section.

Assist Grips

54G249

Assist grips are provided for passenger
convenience.

Assist grips is not provided on driver seat.

Glove Box

74LHT0519

To open the glove box, pull the latch lever.
To close it, push the lid until it latches
securely.

Cup Holder and Storage Area (if 
equipped)
Front

74LHT0520

Passenger side

74LHT0529

To use the cup holder, push it. The cup
holder slides out automatically. After using
the holder, push it back to return it.

Rear

74LHT0527

The storage area is provided in the center
console.

NOTICE

To avoid damaging the assist grip
and the molded headlining, do not
hang down the assist grip.

EXAMPLE

WARNING

Never drive with the glove box lid
open. It could cause injury if an acci-
dent occurs.

EXAMPLE

Summary of Contents for Swift 2015

















































































































































































































































































































































Reviews:

No comments

Related manuals for Swift 2015

GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
WABCO TP2205 Installation Manual preview
TP2205
Brand: WABCO Pages: 48
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
Edelbrock 2917 Nstallation Instructions preview
2917 Nstallation
Brand: Edelbrock Pages: 1
Buick 1988 Riviera Owner'S Manual preview
1988 Riviera
Brand: Buick Pages: 161
Mazda MX-3 1995 Workshop Manual preview
MX-3 1995
Brand: Mazda Pages: 1001
QA1 GS501 Installation Instructions preview
GS501
Brand: QA1 Pages: 3
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8
JBA 1528S Installation Instructions And Warranty Information preview
1528S
Brand: JBA Pages: 5

Brands by name

Popular brands

Load more brands