Suzuki Swift 2015 Owner'S Manual Download Page 171

Page: 171 / 336

5-44

OTHER CONTROLS AND EQUIPMENT

74LH0-74E

MP3/WMA/AAC

No playback

The disc contains unsupported formatted
data.

Check the file format.

Sound skips or noise produced

Sound skipping may occur when playing
VBR (Variable Bit Rate) files.

It is not recommended to play VBR files.

USB

Playback does not start when the USB
device is connected.

There is no supported format file to play
on this unit.

Check the file format.

The current consumption of the USB
device exceeds 1.0 A.

Use an USB device with a current con-
sumption lower than 1.0 A.

Pairing failed

The distance between this unit and the

ready device is too far, or a metallic
object may be located between the

ready device and this unit.

Change the location of the

ready

device.

The

function of the

ready device is

off.

Refer to the manual of the

ready

device. (Some devices have the power
saving function that automatically acti-
vates after a certain time.)

Unable to receive a call.

Your current location may be out of ser-
vice area.

Drive your vehicle to the service area of
the phone.

The voice quality of hands-free is low
(Distortion, noise etc.).

Another wireless device may be located
near the unit.

Switch off the wireless device or keep it
away from the unit.

Problem

Possible cause

Possible solution

Summary of Contents for Swift 2015

















































































































































































































































































































































Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands

Suzuki Swift 2015, Owner'S Manual

Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands