Suzuki Swift 2015 Owner'S Manual Download Page 156

Page: 156 / 336

5-29

OTHER CONTROLS AND EQUIPMENT

74LH0-74E

the knob (1) to display the device name
or the BD (

Device) address.

NOTE:
When selecting “Go Back”, the previous
menu will be displayed.

Reset to the factory defaults

Follow the instructions below to reset all
the settings to the factory defaults.
1) Press the

setup button (4).

The

setup menu will be displayed.

2) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Setup ”, and
press the knob (1) to determine the
selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Initialize”,
and press the knob (1) to determine the
selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “All Initial-
ize”, and press the knob (1) to deter-
mine the selection.

5) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Confirm”,
and press the knob (1) to start the
reset.

NOTE:
When selecting “Go Back”, the previous
menu will be displayed.

Selection of phone (Select Phone)

Follow the instructions below to select a
phone to be paired with from the registered
phones.
1) Press the

setup button (4).

The

setup menu will be displayed.

2) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Setup ”, and
press the knob (1) to determine the
selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “List Phone”,
and press the knob (1) to determine the
selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select a phone to
be paired with, and press the knob (1)
to determine the selection.

5) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Select”, and
press the knob (1) to determine the
selection.

NOTE:
• When selecting “Go Back”, the previous

menu will be displayed.

• The

ready audio device will be discon-

nected when the phone is selected.

List of phones (List Phones)

Follow the instructions below to display the
names of the registered phones in
sequence.
1) Press the

setup button (4).

The

setup menu will be displayed.

2) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Setup ”, and
press the knob (1) to determine the
selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “List Phone”,
and press the knob (1) to determine the
selection.
The names of the registered phones
are displayed in sequence.

NOTE:
When selecting “Go Back”, the previous
menu will be displayed.

Passkey setting (Set Passkey)

Follow the instructions below to set the
security number (Passkey).
1) Press the

setup button (4).

The

setup menu will be displayed.

2) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Setup ”, and
press the knob (1) to determine the
selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Passkey”,
and press the knob (1) to determine the
selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “New Pass-

Summary of Contents for Swift 2015

















































































































































































































































































































































Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands

Suzuki Swift 2015, Owner'S Manual

Search results

Summary of Contents for Swift 2015

Reviews:

Related manuals for Swift 2015

Brands by name

Popular brands