Suzuki Swift 2015 Owner'S Manual Download Page 14 | Manualshive

Page: 14 / 336

background image

0-6

55KS0-74E

9. All maintenance actions (as specified in the Owner’s Manual

and Service Booklet) need to be followed and recorded in the
manual for emission warranty.

10.The customer needs to produce the PUC (Pollution Under

Control) certificate valid for the period preceding the test during
which the failure is discovered. The receipts (for the mainte-
nance of the vehicle as per specification in Owner’s Manual
and Service Booklet from the date of original purchase of the
vehicle) will also be required.

Conditions under which the Emission Warranty is not
APPLICABLE

1. In the absence of valid PUC certificate.

2. Vehicle not serviced from Maruti Suzuki authorised workshop

as per the schedule specified in this Owner’s Manual and Ser-
vice Booklet.

3. Vehicle subjected to abnormal use (accident, motor race, ral-

lies or for the purpose of establishing the records etc).

4. Use of non MGP (Maruti Genuine Part).

5. Vehicle that has been tempered with.

6. Tampering with odometer so that the actual kilometer reading

can not be determined.

7. Use of adulterated fuel and/or unspecified oils (Engine oil,

Transmission oil and Brake oil etc).

Annexure - A

List of parts covered under Emission Warranty

1. Fuel Injection Assembly, Pressure Regulator, Throttle Body

Assembly

2. Electronic Control Module (ECM).
3. Intake Manifold.
4. EGR valve.
5. Ignition Coil.
6. Canister Assembly.
7. Vapour Liquid Seperator.
8. Fuel Tank and Filler Cap.
9. PCV (Positive Crankcase Ventilation) Valve.

10. Oil Filler Cap.
11. Catalytic Convertor.
12. Exhaust Manifold.
13. All Fuel Injection System related SENSORS.
14. High Pressure Fuel Pump.
15. Glow Plug.
16. Glow Plug Controller.

«
...
12
13
14
15
16
...
»

Summary of Contents for Swift 2015

















































































































































































































































































































































Reviews:

No comments

Related manuals for Swift 2015

Brand: cam Pages: 28

Brand: Wagan Pages: 12

Brand: iArmor Pages: 6

Multiple G9F18 AU000

Brand: Genesis Pages: 3

Brand: Whispbar Pages: 15

2010 Civic Sedan

Brand: Honda Pages: 390

Brand: Ecco Pages: 9

V70XC Cross country 1998

Brand: Volvo Pages: 262

Brand: INDIWORK Pages: 18

Brand: Opel Pages: 103

2007 SLR Mclaren

Brand: Mercedes-Benz Pages: 425

Brand: Conrad Pages: 50

Brand: Peiying Pages: 32

2010 Accord Coupe

Brand: Honda Pages: 410

Brand: Menabo Pages: 8

Brand: Setma Pages: 13

Brand: Lexus Pages: 878

Brand: Dacia Pages: 244

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands