6A2-40 ENGINE MECHANICAL (K9K ENGINE)
14) Check that special tool (B) inserts holes of camshaft belt pul-
ley hub and cylinder head smoothly.
If not, loosen camshaft pulley bolts (1) by one turn, and turn
camshaft pulley hub (2) to just aligning slit (3) of camshaft
pulley hub with hole (4) of cylinder head.
Special tool
(B): 09919-58120
15) Check timing belt pulley key (1) is positioned vertical
upwards.
16) Adjust timing belt tension as follows.
a) Loosen timing belt tensioner bolt (1) while holding timing
belt tensioner by hexagon wrench, and then gradually bring
movable index (3) to center of timing window (2) turing tim-
ing belt tensioner.
b) Tighten timing belt tensioner bolt and camshaft pulley bolts
as specified torque.
Tightening torque
Timing belt tensioner bolt (a): 27 N·m (2.7 kg-m, 19.5 lb-ft)
Camshaft pulley bolt: 14 N·m (1.4 kg-m, 10.5 lb-ft)
17) Remove special tools (A) and (B).
NOTE:
Do not tighten camshaft pulley bolts.
NOTE:
• If moving index position upper than timing window,
turn timing belt tensioner to counterclockwise.
• If moving index position is lower than timing window,
turn timing belt tensioner to clockwise.