ENGINE MECHANICAL (K9K ENGINE) 6A2-33
Installation
Reverse removal procedure for installation noting the following.
• Tighten engine mounting nuts (1) to specified torque.
Tightening torque
Engine mounting nut (a):
55 N·m (5.5 kg-m, 40.0 lb-ft)
• Install transmission assembly referring to “Transmission Dis-
mounting and Remounting” in Section 7A2.
• Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been rein-
stalled.
• Refill engine oil referring to “Engine Oil and Filter” in Section
0B.
• Refill cooling system referring to “Coolant Replacement” in
Section 6B2.
• After connecting discharge hose pipe to A/C compressor,
charge A/C system referring to “Charging Procedure” in Sec-
tion 1B.
• Check to make sure that there is no fuel leakage, oil leakage,
coolant leakage, refrigerant and exhaust gas leakage at
each connection.
CAUTION:
Before installing intake air pressure sensor hose,
degrease connect part of hose and intercooler outlet
hose. Otherwise hose may become detached and cause
turbo system failure.
1, (a)
1, (a)