COOLING AND LUBRICATION SYSTEM 7-5
Fins bent down or dented can be repaired by straightening them
with the blade of a small screwdriver.
RADIATOR INSTALLATION
• Install the cooling fan.
Cooling fan mounting bolt: 8 N·m (0.8 kgf-m, 6.0 lb-ft)
• Install the radiator.
• Route the radiator hoses properly. (
10-24)
• Pour engine coolant. (
2-17)
• Bleed air from the cooling circuit. (
2-18)
• Install the under cowlings. (
8-5)
WATER HOSE INSPECTION
• Remove the under cowlings. (
8-5)
• Lift and support the fuel tank. (
5-3)
Any water hose found in a cracked condition or flattened must
be replaced.
Any leakage from the connecting section should be corrected by
proper tightening.
Summary of Contents for 2006 gsxr 600
