34
34
6300162CE
6300162CE
Used
Used // interchangeable
interchangeable parts
parts and
and materials
materials
Material
Material code
code
KAILASH
KAILASH /
/ TRAVERSE
TRAVERSE /
/ VERTICAL
VERTICAL PIEZO
PIEZO
100021787
100021787
KAILASH
KAILASH /
/ TRAVERSE
TRAVERSE /
/ VERTICAL
VERTICAL PIEZO
PIEZO ADHESIVE
ADHESIVE
100018656
100018656
Tools,
Tools, equipment,
equipment, security
security
Material
Material code
code
TWEEZERS
TWEEZERS SIPEL
SIPEL 1303
1303 -
- SA
SA
100015353
100015353
Description
Description
1.
1. Follow in
Follow instructions for
structions for removing the
removing the bezel, inner
bezel, inner module, pre
module, pressure sensor
ssure sensor and
and
accumulator assembly. (Instructions
accumulator assembly. (Instructions 6300159CE
6300159CE
1-3)
1-3)
2.
2. Remove
Remove the
the piezo
piezo plate
plate with
with tweezers.
tweezers.
3.
3. The piezo
The piezo is held
is held in place
in place with a
with a ring of
ring of double sided
double sided adhesive, and
adhesive, and may crack
may crack
during removal, only remove the piezo element if it
during removal, only remove the piezo element if it is cracked or damaged.
is cracked or damaged.
4.
4. Clean
Clean all left
all left over pie
over piezo adh
zo adhesive from
esive from the low
the lower casing.
er casing.
5.
5. Place the
Place the new adhesive,
new adhesive, making sure
making sure to not
to not have any
have any is left outside
is left outside the piezo
the piezo divet.
divet.
6.
6. Place the
Place the new Piezo
new Piezo element onto
element onto the adhesive,
the adhesive, making sure
making sure the wires
the wires are aligned
are aligned
properly in their recess and not being pinched between the lower casing and
properly in their recess and not being pinched between the lower casing and piezo
piezo
plate.
plate.
7.
7. Carefully press
Carefully press the piezo
the piezo in place
in place along the
along the edges using
edges using a a
a a ESD gloved
ESD gloved finger tip.
finger tip.
8.
8. Place the
Place the piezo contact
piezo contact pins into
pins into their respective
their respective slots. Note, the
slots. Note, the contact pin w
contact pin wires
ires
may need to be crossed, and this will not effect device function. (Pic 1)
may need to be crossed, and this will not effect device function. (Pic 1)
9.
9. Assemble
Assemble the
the Unit
Unit following
following instructions
instructions 6300159CE
6300159CE
5-7.
5-7.
1
1
The Piezo element
The Piezo element place with the wires in
place with the wires in their correct locations.
their correct locations.
Piezo
Piezo
change
change