SusiAir PILATUS PORTER PC6, Maintenance Program

Page: 57 / 248

FORM ASI-PC6 100 Hours / Annual Inspection Aircraft Reg.: __________
Reissued: 2
Revision: 1 Date: July 2020 Page 8 of 15
NO. DESCRIPTION TASK NO. MECH. ENG. RII
5
Wing struts - external
N/A
Examine attachment brackets.
Examine strut exterior.
6
Wing struts - internal
N/A
Examine.
7
Wing tips
N/A
Examine.
8
Aileron support structure
N/A
Examine aileron support brackets, hinge bearings, control rod
attachment points and attaching parts.
9
Ailerons
N/A
Examine aileron skin and structure, balance arms and static discharge
wicks.
10
Aileron - balance tabs
N/A
Examine balance tabs, tab control rods, rod ends, support brackets,
hinges and attaching parts. Lubricate hinges (Material No. P04-011).
11
Flap support structure
N/A
Examine flap support brackets, hinge bearings, control rod
attachments, actuator support bracket and attaching parts.
12
Flaps
N/A
Examine structure and skin. Use a mirror and light to examine the skin
of the flaps and slats for cracks in the areas where the angles are
attached.
General - Close Up
NOTE: Do these steps when the engine, electrical and avionic inspections are complete
1
Access panels and fairings
N/A
Install.
2
Fuselage - internal
N/A
Install internal linings.
3
Engine cowls
N/A
Install.
4
Aircraft
07-10-00 N/A
Remove the aircraft from jacks.
5
Aircraft
N/A
Make sure that the work area is clean and clear of tools and other
items.
C. PROPELLER & ENGINE
Chapter 61 - Propeller
1
Spinner dome
N/A
Remove.
2
Propeller de-ice boots, slip-ring and brushes
N/A
Examine.
3
Slip-ring (Beta)
N/A
Examine. Check gap between slip-ring and carbon block is no more
than 0,50 mm (0.02 in.).
4
Blade clamps (for Steel Hub Propellers)
DELETED N/A N/A N/A
Check alignment
Lubricate with grease (Material No. P04-016)
DELETED N/A N/A N/A
5
Spinner body and backplate
N/A
Examine.
6
Blades
N/A
Examine.
7
Spinner Dome
N/A
Install.