SusiAir PILATUS PORTER PC6, Maintenance Program

Page: 48 / 248

Form ASI PC6 Pre-Flight Pilatus Porter
MAINTENANCE DEPARTMENT
PRE FLIGHT
PILATUS PORTER PC-6
Ref AMM 05-21-03
Reissued: 2
Revision: 1
Date: July 2020 Page 1 of 2
NO. ITEM OPERATION SIGN
A. AIRFRAME
1. Protective covers, blanks
and restraints
Remove
2. External flight control locks Remove
3. Chocks
Make sure that chocks are in position if
required
4. Fuel system
Check contents
Replenish as required
5. Fuel filler caps Make sure correctly installed
6. External surface of the aircraft Look for damage and leaks
7. Mainwheel dirt scrapers
(If installed)
Look for damage
8. Mainwheels and tires Check tire pressure
9. Static ports Make sure that ports are clear
10. Stowage compartment
Make sure that service ladder, tail wheel
steering arm and passengers seats are
secure
11. Tail wheel and tire Check tire pressure
12. Pitot tube Look for damage
13. Windshield and windows Make sure that windows are clean
14. Park brake
Set ON or OFF as required
(Set OFF if frost is expected)
15. Flight controls
Operationally test and check for full and free
movement
16. Co-pilot control column
(If installed)
Look for damage
Make sure installed correctly
17. Flaps Install safety pin on flap control switch
18. Internal flight control lock Engage
19. Cockpit and cabin
Make sure that the cockpit and cabin are free
from loose articles
B. ENGINE
1. Hinged engine cowls Open
2. Fuel system
Look for water, drain at;
- collector tank
3. Snow vanes
Remove if temperature is above 15 deg C (59
deg F)
4. Engine and accessories Look for damage and leaks
5. Engine compartment (external) Look for damage and leaks
6. Hinged engine cowls Close